How To Change Chandelier Light Bulbs in High Ceilings?

Nothing beautifies a home more than lights in a high chandelier but gets burned out at some point. The problem comes when it’s time to change the light bulbs on a high chandelier.

Here are simple steps to answer you on how to change chandelier light bulbs in high ceilings.

It is possible to change the chandelier light bulb in a high ceiling without hiring a third party to do the job for you with the right tools.

You can do this using a telescoping bulb grabber or a ladder.

how to change chandelier light bulbs in high ceilings

Related Reading: How to Change Light Bulbs in High Ceilings?

Method One: Use Telescoping Bulb Grabber

A Telescoping bulb grabber is an excellent option to change chandelier light bulbs, especially if heights scare you.

Here are simple steps to follow:

Step 1: Turn off the lights from the main switch and wear rubber gloves.

Step 2: Connect the grabber to the extension pole to make it easier for it to reach the light bulb

Step 3: Gently take the grabber to the light bulb and grab it with the provided notches

Step 4: Rotate the light bulb anti-clockwise until it is loose enough to get it out of the bucket

Step 5: Slowly bring the grabber down and remove it by pulling the release string.

Step 6: Position the new light bulb to the grabber, raise it to the Chandelier, and screw it on the socket.

Step 7: Once the bulb is secure enough, pull the release string to release it from the grabber.

Step 8: Switch on the Chandelier to make sure it is in good working condition.

May Interest: Shop Lights for High Ceilings Guide

Method 2: Use Ladders

Another way to change the Chandelier light bulb is using a ladder and rubber gloves.

However, the ladder you need should be taller than the standard ladders. If you have to hire or buy one, it’s best to measure the room’s height to get the right size.

Here is a simple procedure to follow.

Step 1: Switch off the Chandelier light bulbs from the main switch.

Step 2: Position the ladder on a stable surface where you will have easy access to the light bulb.

Step 3: If the ladder is not stable, you can have someone hold it to keep it steady.

Step 4: Once you’re in an excellent position to access the bulb, remove the cover over it and gently rotate the chandelier bulb.

Open the light bulb counterclockwise if the bulb is facing down and clockwise if the bulb is facing up.

Step 5: Replace the old bulb with the new bulb and return the cover of the chandelier light bulb.

Step 6: Slowly climb down the ladder and switch on the lights from the main switch to make sure everything is working fine.

Read More: How to Assemble Arc Floor Lamps?

Precautions When Changing Chandelier Light Bulbs in High Ceiling

Changing the Chandelier light bulbs involves combining the dangers of electricity and height.

This is why you need to take extreme caution when changing the chandelier light bulb on the high ceiling.

Some of the precautions to take include:

1. Always switch the electricity from the breaker box to avoid getting electrocuted during the process.

2. When using the ladder, ensure it is standing on stable ground and, if possible, have someone hold it to the ground.

3. Before climbing the ladder, inspect it to ensure it is in good working condition.

4. When changing the bulb, avoid tightening too much as you could end up breaking it.

5. Be sure to use dry rubber gloves when changing the light bulbs.

6. Dispose of the old chandelier bulb properly to avoid the possibility of injuries.