Good floor lamps add a great dimension to your home or workplace wherever you have used them for. Floor lamps do not require any support; they stand on their own, due to which sometimes the pole leans over and breaks too.
After pole leaning or breaking, some people think that they need a new one. But it will cost you a lot so if you want an affordable option then fixing that old lamp can be a good option.
The solution to this problem is to learn how to fix a floor lamp pole properly.
So, without any further time-wasting let’s get started.
How to Fix a Floor Lamp Pole?
Fixing a floor lamp stem is not that hard, all you need to do is follow the steps written below.
Floor Lamp Pole Repair Kit
Investing in a good repair tool or kit can never be a waste of money. You can check Creative Hobbies: Make a Lamp Repair or Rewiring Kit. In this kit, you will find everything that you will need for your lamp repairing.
But if you want individual tools then you need to buy all the tools written below which include,
- Threaded steel pipe
- Lock washers
- Basic equipment like a screwdriver, hammer, etc.
Step by Step Guide
Troubleshooting of floor lamp poles is of two types which include broken floor lamp poles and leaning floor lamp poles.
So, first, let’s have a look at,
1. How to Fix Leaning Floor Lamp Pole?
Step 1: Start by unplugging the lamp and waiting till the lamps and bulbs cool down.
Step 2: Gently wiggle the parts of the lamp and try to find which part loosened. Most of the times wobbliness or leaning are due to the base part.
Step 3: After that place the lamp on a soft surface.
Step 4: Hold the bottom firmly. In order to tighten the loose middle tube rotate the top part of the pole in the right-hand direction.
Step 5: If other tubes are also loosened, do the same process for them too.
Step 6: Check the lamp pole and wiggle it gently if it still leans then you need to check the base screws and nuts.
Step 7: Tighten all the base screws and nuts and the leaning of your lamp pole will be fixed after that properly.
2. How to Fix Broken Floor Lamp Pole?
Fixing a broken lamp pole can be quite difficult and in the end, you might need a new pole but before that, you can try the steps written below in order to fix it properly.
Step 1: Start by unplugging the pole and waiting till the lamps and bulbs cool down.
Step 2: Once they cool down, gently place the lamp with something straight (a wall can be a perfect choice) for support.
Step 3: Glue the entire pole with a strong glue (Check the top-rated glue for floor lamps). Use a brush for even application.
Step 4: After gluing, take a rope and surround it on the lamp pole until the end.
Step 5: Rope helps in keeping the pole in place and it will look aesthetic too. You can even paint it if you want to. Before gluing make sure all the wires, nuts, and screws are tightly closed.
Here is a short video for easy understanding:
Safety Tips for Repairing a Floor Lamp Pole
1. Never wrap the lamp with any paper, plastic, fabric, or foil paper.
2. Never place the lamp close to the flame.
3. Before starting the repairing procedure make sure to turn off the socket button and for more safety measurements you can even remove the wire from the socket.
4. Before repairing, wait until the rod and bulb cool down.
Repairing the floor lamp pole can be tricky at times but I hope after this article your difficulty will be easy.