A Complete Guide on the Best Hardwired LED Garage Light

Are you one of those people who usually spend a significant amount of their time in the garage?

If you are one of them, then you would go to every possible detail of your garage and would make sure that everything inside is perfect.

The main aspect of a wonderful garage is lightning. An adequate amount of lightning not only enhances the quality of work but also leads to safety at work.

Here you will get to know:

Things to Keep in Mind While Buying Hardwired LED Garage Lights

Lights are usually installed where these are needed the most. So, make sure that the lights you are purchasing are exactly according to your requirements.

Keep these things in mind when using the lights.

• Make sure that you shop for the Lumens and not for the watts.
• Choose the light color according to your requirement and work.
• The LED bulb must be according to your fixture. Match the shape to your fixture before buying.
• LED bulbs must be selected according to the type of dimmer.
• Make sure that the LED bulbs are not of poor quality and there does not have any effect on the eye.
• LED bulbs must be conventional power consuming.

Other considerations include:

How Many Hardwired LED Garage Lights Should I Buy?

Deciding the size of the light or the required number of lights in a garage can be a tricky question.

Size is usually selected by measuring the height of the front door which would be ¼ to 1/3 of the size.

The suggestion is that there should be a minimum of 30-40 lumens per square foot in the garage.

If you spend a lot of time in the kitchen as a hobby or work, then a suggestion would be to go higher. Which would be 50-60 lumens per square foot.

Is It Linkable?

LED lights are linkable, you just have to make sure that the first power cord is facing outward the outlet.

Then hang your next light and insert the end of the linking cable from the last one into the connector.

You should repeat the procedure until all the lights are linked.

If you consider buying a linkable light, Hykolity ceiling lights with pull chain are the best option!

Flush Mount? Hanging?

Flush Mount and Semi-flush or hanged lights are naturally different from each other.

Flush mount lights are directed with the ceiling of the room or garage while Semi-flushed or hanging lights are down several inches from the floor.

There is empty airspace between the ceiling and the fixture. It also gives a nice aesthetic view of the hanging location.

Choosing flush mount ones or hanging ones is dependant on your personal preference. But the basic rule is that if you have a high ceiling, hanging garage light will be much better as it will cover more space.

What Color Temperature to Consider?

LED bulbs come in different temperatures according to demand and requirements. These are usually:

• Soft Light 2700K-3000K
• Cool White 3500K-4100K
• Day Light 5000K-6500K

Soft light is usually used in kitchen work. However, garage work requires a lighter because garage work requires precision and soft light can not provide that precision.

As the temperature rises the color becomes whiter, so the suitable Kelvin for the garage work is between 4000K and 7000K.

How Much Does It Cost?

LED bulbs may sound costlier initially in comparison to incandescent bulbs but if the price is compared with reference to life span, the LED hardwired lights for garage would outclass the incandescent bulbs.

Their projected lifespan is 25,000 hours (20 times more than an incandescent bulb) and the average cost per garage light is around $20 – $60.

If you have a short budget, the FaithSail 4Ft shop lights are recommended.

Is It Safe to Use?

LED bulbs do not contain any ultraviolet rays and thus these are safe to work with.

How to Hardwire a LED Garage Light?

Tools and Materials Required

For the installation process,

TOOLS  REQUIRED	MATERIALS REQUIRED
4-inch-1 Screw Driver	10-32 ground screw
Needle Nose-pliers	Electrical Box
Non-contact voltage tester	Electrical tape
Pliers	Light texture
Stepladder	Wire Nuts
Voltage tester
Wire Cutter

Steps

The installation process must be right because poor installation techniques can lead to a potentially lethal shock or fire.

Step 1: First of all, you will have to remove the fixture and inspect the wiring.

You will have to get rid of the plug and there will be the positive and negative terminal of the wire. Which will go into the ceiling.

Step 2: Afterward, turn off the power supply and check for the ground wire. Then add a ground wire to the metal box and reduce overhead work.

Step 3: Then manage the proper distance between the hanging. Chains must be hanged to hold the light.

Step 4: Reconnect the same wires and then close the box.

Sometimes there are three colors founded inside the terminal wire, which are Black, White, and green or bare copper.

Positive and Negative wire will be colored Black and White, these will be connected with Black and White from the ceiling respectively.

FAQs

1. Why Install Hardwired LED Lights?

If you are concerned about your garage, you must install LED lights in there, because working without LED lights that are not only cost-effective but bright as well would be stupid. Isn’t it?

Fading and dim lights would give poor vision. This would not only hinder the execution of your work but may also lead to injuries and compromise on the quality of work.

2. Can You Hardwire an LED Shop Light?

Yes, LED shop lights can also be hardwired. The idea of lighting is to spread light across your shop to give a better view.

First, measure the distance of directed lights from the adjacent walls.

It will probably limit your options. According to that hanging light distance and location will be selected.

Old recessed lights will be removed and a hardwired process will be carried out in place.